Πυράντοχες Πόρτες NINZ

Οι σειρές Univer και Proget της NINZ είναι προσεκτικά σχεδιασμένες ώστε να υπερβαίνουν τα βιομηχανικά πρότυπα, προσφέροντας όχι μόνο ισχυρή πυραντίσταση αλλά και μια ξεχωριστή πινελιά σύγχρονης ιταλικής φινέτσας.

NINZ Univer Series

Μονόφυλλη: E 60, EI2 60 , EI2 90, REI 120

Δίφυλλη: EI2 60 , EI2 90, REI 120
Fully galvanized door, including the "hidden" parts

Made of "Sendzimir" processed hot-galvanized sheet metal

Corrosion protection also provided along cut edges of the metal sheets

Painted with epoxy-polyester thermoset powders in a 180 degrees (Celsius) oven

Substantial paint layer (70 microns plus)

Optimal corrosion resistance demonstrated by 500 hour salt-fog test

Unaffected by severe climate changes, demonstrated by 2000 hours with +60° to -10° cycles at 75% humidity

Finishing with high-quality aesthetics

Orange skin anti-scratch structured paint

Customizable with wide selection of RAL colors
Door reversibility (except in combination with certain optional accessories)

Indication of door opening direction not necessary

Multiple installation methods for each door

Type approvals for anchors for mortar fixing or expansion screws
Παραγωγή σε σύγχρονες και λειτουργικές εγκαταστάσεις που χρησιμοποιούν τις τελευταίες τεχνολογίες για τη διατήρηση υψηλών επιπέδων ποιότητας και ομοιομορφίας του προϊόντος.

Ολόκληρη η παραγωγική διαδικασία - από τις πρώτες ύλες έως τα βαμμένα και συσκευασμένα προϊόντα - πραγματοποιείται εντός των ιδιόκτητων εγκαταστάσεων της Ninz, εξασφαλίζοντας έλεγχο 360 μοιρών στην πόρτα

Made of "Sendzimir" processed hot-galvanized sheet metal, press folded and electro welded

Perimetral rebate on 4 sides

Internally reinforced with hot-galvanized steel profiles

Heat-insulated with treated mineral wool

Internal stiffeners for overhead door closer and panic bar
Made of "Sendzimir" processed hot-galvanized sheet metal

Grooves for thermo expansive sealing and rebate sealing

Suitable for anchors for mortar fixing or expansion screws

Detachable rebate for application on finished flooring

Removable threshold for thresholdless installation (except for doors with environmental characteristics)

Strike plates in black plastic for lock bolt and safety bolts

Assembled door frames for one-leaved doors

Assembly required for two-leaved door frames
Mounted on vertical door frame profiles and central vertical profiles on two-leaved doors

For on-site mounting on the door frame's upper cross-beam

Mounted above and below the EI2 90 and REI 120 leaves
Nr. 2 three-wing hinges for each leaf

of which one ball-bearing hinge with screws for vertical adjustment of the leaf, CE marked as per EN 1935, classified for up to 160 kg load, 200.000 cycles durability, suitable for fire door use

and one hinge with self-closing spring
Nr. 2 safety bolts on hinge side leaf edge
Reversible locking mechanism with bolt and central lock

CE marked in conformity with EN 12209 standard

Insert with patent key, Euro profile cylinder ready
Fire rated handle in black plastic with steel core

Steel installation plate with cylinder hole

Cover plate in black plastic

Fastener screws and patent key insert
Two-leaved doors include an RC/STD closing regulator to ensure the correct closing sequence of the leaves

CE Marking in conformity with EN 1158 standard
"Flush-bolt" automatic locking of the inactive leaf

Lever control for unlocking
Inactive leaf lock activated device which inserts rod into the upper strike box

Upper strike box in black plastic with steel roller
Vertical rod with steel point which inserts into lower strike box

Floor catch (floor-mounted floor catch) made of self-extinguishing black plastic, for doors without threshold

Floor catch in black plastic with a steel roller, for doors with threshold
Metal tag with door identification data, in accordance with current regulations
Standard painted with epoxy-polyester thermoset powders in a 180 degrees oven, orange skin, anti-scratch finishing

Standard RAL 9010
Single door wrapped into stretchable polyethylene (PE) film

Assembled door frames for one-leaved doors

Assembly required for door frames for two-leaved doors

Palletized on wooden pallets

Doors for panic exits (see panic bars)

Doors for emergency exits (see emergency exit handles

Open doors which must be closed in case of fire (see leaf holding systems)
Frame extensions

Drip steel-profile

Special fastener screws

Kick and protection plates in stainless steel

Windows

Roofing
Electrically-activated lock mechanisms

Electric handle mechanisms

Magnetic blocking mechanisms
Sealing

Door closers

Special closing regulators

Special handles
Air permeability according to - EN 1026

Thermal transmittance to - EN 10077

Water-tightness according to - EN 1027

Resistance to windload according to - EN 12211
Smoke control Door - EN 1634-3

Resistance to repeated opening and closing - EN 1191

Mechanical strength - EN 1192

Resistance to vertical load - EN 947

Static torsion - EN 948

Soft and heavy body impact - EN 949

Hard Body impact - EN 950
Select finishing from a wide variety of RAL colours

NDD - Ninz Digital Decor, graphic images applied with special ink jets and protected by a transparent topcoat. Infinite varieties of customizable decorations in harmony with specific door settings

Stainless steel handles

Colored handles
Sturdy wooden crates protect all doors and related accessories

NINZ Proget Series

Single leaf: E 60, EI2 60 , EI2 90, REI 120

Double leaf: EI2 60 , EI2 90, REI 120
Fully galvanized door, including the "hidden" parts

Made of "Sendzimir" processed hot-galvanized sheet metal

Corrosion protection also provided along cut edges of the metal sheets

Painted with epoxy-polyester thermoset powders in a 180 degrees (Celsius) oven

Substantial paint layer (70 microns plus)

Optimal corrosion resistance demonstrated by 500 hour salt-fog test

Unaffected by severe climate changes, demonstrated by 2000 hours with +60° to -10° cycles at 75% humidity

Finishing with high-quality aesthetics

Orange skin anti-scratch structured paint

Customizable with wide selection of RAL colors
Door reversibility (except in combination with certain optional accessories)

Indication of door opening direction not necessary

Multiple installation methods for each door

Type approvals for anchors for mortar fixing or expansion screws
In-house Ninz R&D with specialized testing equipment

Fire testing in accordance with UNI 9723 and EN 1634-1

Mechanical testing for the CE marking of accessories

CE marked door accessories studied and sized to meet standard European requirements

Careful selection of materials and manufacturing methods

Strict product testing for conformity to declared technical standards

Absolute functional certainty over time

Doors "type approved" in compliance with M.D. 21 June 2004

Products delivered with the documentation required by current regulations
Manufacturing in modern and functional facilities which employ the latest technologies to maintain high quality levels and product uniformity

The entire production process - from raw materials to painted and packaged products - takes place inside Ninz's own facilities, ensuring a 360 degree door control

Made of "Sendzimir" processed hot-galvanized sheet metal, press folded and electro welded

Perimetral rebate on 4 sides

Internally reinforced with hot-galvanized steel profiles

Heat-insulated with treated mineral wool

Internal stiffeners for overhead door closer and panic bar
Made of "Sendzimir" processed hot-galvanized sheet metal

Grooves for thermo expansive sealing and rebate sealing

Suitable for anchors for mortar fixing or expansion screws

Detachable rebate for application on finished flooring

Removable threshold for thresholdless installation (except for doors with environmental characteristics)

Strike plates in black plastic for lock bolt and safety bolts

Assembled door frames for one-leaved doors

Assembly required for two-leaved door frames
Mounted on vertical door frame profiles and central vertical profiles on two-leaved doors

For on-site mounting on the door frame's upper cross-beam

Mounted above and below the EI2 90 and REI 120 leaves
Nr. 2 three-wing hinges for each leaf

of which one ball-bearing hinge with screws for vertical adjustment of the leaf, CE marked as per EN 1935, classified for up to 160 kg load, 200.000 cycles durability, suitable for fire door use

and one hinge with self-closing spring
Nr. 2 safety bolts on hinge side leaf edge
Reversible locking mechanism with bolt and central lock

CE marked in conformity with EN 12209 standard

Insert with patent key, Euro profile cylinder ready
Fire rated handle in black plastic with steel core

Steel installation plate with cylinder hole

Cover plate in black plastic

Fastener screws and patent key insert
Two-leaved doors include an RC/STD closing regulator to ensure the correct closing sequence of the leaves

CE Marking in conformity with EN 1158 standard
"Flush-bolt" automatic locking of the inactive leaf

Lever control for unlocking
Inactive leaf lock activated device which inserts rod into the upper strike box

Upper strike box in black plastic with steel roller
Vertical rod with steel point which inserts into lower strike box

Floor catch (floor-mounted floor catch) made of self-extinguishing black plastic, for doors without threshold

Floor catch in black plastic with a steel roller, for doors with threshold
Metal tag with door identification data, in accordance with current regulations
Standard painted with epoxy-polyester thermoset powders in a 180 degrees oven, orange skin, anti-scratch finishing

Standard RAL 9010
Single door wrapped into stretchable polyethylene (PE) film

Assembled door frames for one-leaved doors

Assembly required for door frames for two-leaved doors

Palletized on wooden pallets

Doors for panic exits (see panic bars)

Doors for emergency exits (see emergency exit handles

Open doors which must be closed in case of fire (see leaf holding systems)
Frame extensions

Drip steel-profile

Special fastener screws

Kick and protection plates in stainless steel

Windows

Roofing
Electrically-activated lock mechanisms

Electric handle mechanisms

Magnetic blocking mechanisms
Sealing

Door closers

Special closing regulators

Special handles
Air permeability according to - EN 1026

Thermal transmittance to - EN 10077

Water-tightness according to - EN 1027

Resistance to windload according to - EN 12211
Smoke control Door - EN 1634-3

Resistance to repeated opening and closing - EN 1191

Mechanical strength - EN 1192

Resistance to vertical load - EN 947

Static torsion - EN 948

Soft and heavy body impact - EN 949

Hard Body impact - EN 950
Select finishing from a wide variety of RAL colours

NDD - Ninz Digital Decor, graphic images applied with special ink jets and protected by a transparent topcoat. Infinite varieties of customizable decorations in harmony with specific door settings

Stainless steel handles

Colored handles
Sturdy wooden crates protect all doors and related accessories